17/11/2026

A method older than writing, still the best way to turn an idea into silver. How an AGO x GO watch case goes from hand-carved wax to finished, numbered piece.

Torch flame and tweezers working on a silver watch case at the bench

Lost-wax casting is one of those inventions so good that humanity has never bothered to replace it. People were doing it some five or six thousand years ago, long before they had agreed on an alphabet, and the principle has not changed a great deal since. You make the thing in wax. You bury the wax. You melt it away. You pour metal into the ghost it leaves behind. It is part chemistry, part sculpture and part séance.

What is lost-wax casting?

Lost-wax casting (also called investment casting, or cera perdida in Spanish) is a method of making a metal object from a wax model. The model is encased in a heat-resistant mould, the wax is melted and burnt out, and molten metal is poured into the cavity it leaves. The wax is lost in the process, which is why every casting begins with a new model and why no two hand-finished pieces are ever quite identical.

How is an AGO x GO watch case made, step by step?

  1. The drawing. Every case starts in pencil, around the exact dimensions of the Swatch it will hold: 34 mm for the Skin, 25 mm for the Lady.
  2. Carving the wax. The form is carved by hand from jeweller's wax with files, blades and scrapers. No shortcuts, no printers.
  3. Texturing with the wax pen. A heated wax pen, essentially a tiny soldering iron for wax, is used to melt, add and drag material, building ridges, hammer marks and textures that would be impossible to cut.
  4. Spruing. Wax channels called sprues are attached so the molten metal has a path in and the air has a path out.
  5. Investing. The wax model is set in a flask and surrounded with investment, a fine plaster-like material that captures every detail.
  6. Burnout. The flask goes into a kiln. The wax melts and burns away, leaving a perfect hollow in its exact shape. This is the moment the wax is lost.
  7. Casting. Molten silver is poured into the hollow and left to solidify.
  8. Breaking out. The investment is broken away and the raw casting emerges, rough, dusty and still attached to its sprues.
  9. Finishing. The sprues are cut off and the case is filed, sanded and polished by hand, then checked against the watch it must hold.
  10. Numbering. Each piece is numbered by hand within its edition of 30.
A rotary polishing wheel finishing the inside of a silver watch case

What tools are used?

  • For the wax: carving wax, wax files, scalpels and carving blades, and a wax pen for adding and texturing.
  • For the casting: sprues, a flask, investment powder, a burnout kiln and a crucible for the molten silver.
  • For the finishing: a jeweller's saw, hand files, emery papers, a torch, a rotary tool with burrs and polishing wheels, and a great deal of time.

Why not just 3D-print it, or machine it?

Because a machine produces exactly what you told it to, which is precisely the problem. Hand-carved wax carries the hesitations, decisions and small accidents of the person carving it, and casting preserves all of them in silver. That is why a lost-wax piece looks made rather than manufactured, and why every AGO x GO case takes three weeks from order to finished piece.

AGO x GO, a collection by AGO for GONIEVA.

17/11/2026